Wj bumper

Ask us for help

Wj bumper

Postby Chrisbryden » Sun Jan 22, 2017 7:39 pm

So before i buy this does anyone think it wouldnt be possible to get this to go onto my wj. I know it isnt set uo for wj but i think i would most likely be able to fit somehow but dont want to waste the money and it not fit.
Chrisbryden
 
Posts: 17
Joined: Wed Feb 10, 2016 3:40 pm
Location: chicopee
Primary Rig: 00 tj 4 inch lift on 33's

Re: Wj bumper

Postby leafspringsrule89yj » Sun Jan 22, 2017 7:48 pm

You didn't say what it was. But if it's made for anything
But a WJ you'll have to cut old mounts and make new mounts
Then weld them on. If you can do that and it's cheap enough. Yeah.
But if you can't fab a new mount and weld it up yourself, you're better
off getting one made for a WJ.
leafspringsrule89yj
Seasoned Veteran
 
Posts: 389
Joined: Fri Jan 13, 2012 7:50 am
Location: Chicopee, MA
Primary Rig: 99 WJ
Secondary Rig: 88 xj
Tow Rig: 03 F250

Re: Wj bumper

Postby Chrisbryden » Sun Jan 22, 2017 7:50 pm

I cant get thw image to load so here is the url http://www.quadratec.com/products/12153 ... id=1&pid=1
Chrisbryden
 
Posts: 17
Joined: Wed Feb 10, 2016 3:40 pm
Location: chicopee
Primary Rig: 00 tj 4 inch lift on 33's

Re: Wj bumper

Postby Chrisbryden » Sun Jan 22, 2017 8:03 pm

Well the dealership i work at has a body shop and one of the guys owes me. So could i use the same mounta that are on it just need to be relocated or new ones need to be made never put an off road bumper on sry if thw question sounds dumb.
Chrisbryden
 
Posts: 17
Joined: Wed Feb 10, 2016 3:40 pm
Location: chicopee
Primary Rig: 00 tj 4 inch lift on 33's

Re: Wj bumper

Postby leafspringsrule89yj » Mon Jan 23, 2017 9:53 am

If ya got someone to do the work and the price point is right. Why not?
Usually run ya about $300-500 for a good wj bumper.
leafspringsrule89yj
Seasoned Veteran
 
Posts: 389
Joined: Fri Jan 13, 2012 7:50 am
Location: Chicopee, MA
Primary Rig: 99 WJ
Secondary Rig: 88 xj
Tow Rig: 03 F250

Re: Wj bumper

Postby abneron » Fri Apr 21, 2017 5:21 am

It can be done, though you need to do some modifications in order to fit a bumper like that.
abneron
 
Posts: 8
Joined: Sat Apr 08, 2017 10:23 pm


Return to Tech Help

Who is online

Users browsing this forum: No registered users and 0 guests

cron